NukeStarter installation guide

Connect your IGNIS.
Make every start yours.

1. Shut down, switch off the PSU, and unplug your PC.

2. Find the front-panel header. Confirm the placement and the pins in your motherboard manual.

Example motherboard with its F_PANEL front-panel header circled in blue
Motherboard example: the front-panel header LED pins are circled in blue while the power SW PINS are in green. Your header may look different—confirm its position and pin layout in your motherboard manual.

3. Replace the case POWER SW plastic connector with IGNIS POWER SW PIN, place it in pins 8 and 6.

4. Connect POWER LED + to PIN 2; LED − to PIN 4.

5. Check connections before reconnecting power. Need help?

Get Your IGNIS →